Dr. Paulo Jorge da Silva Bartolo
Journal of Biomedical Research and Reviews
Advanced Manufacturing at the School of Mechanical
Name: Dr. Paulo Jorge da Silva Bartolo
Educational Qualification: M.Sc. Ph.D.
Designation: Professor at University of Manchester, UK
Department: Advanced Manufacturing at the School of Mechanical
University: University of Reading
Email: paulojorge.dasilvabartolo@manchester.ac.uk
Research Interests: Biomedical devices, Bio-manufacturing, Tissue engineering,
Biography: Paulo Bartolo is Chair Professor on Advanced Manufacturing at the School of Mechanical, Aerospace and Civil Engineering (MACE), University of Manchester (UK), Visiting Professor at Nanyang University (Singapore), Visiting Professor at the Institute of Technology in Bandung (Indonesia), Professor of Biomaterials (Cathedra UNESCO) at the University of Habana (Cuba), Collaborator Professor of the Advanced Manufacturing Group at the Tecnologico de Monterrey (Mexico) and CIAUD (The Research Centre for Architecture, Urbanism and Design) a Centre of Excellence of the Portuguese Foundation for Science and Technology based at the University of Lisbon (Portugal). At the School of MACE, he is the Head of the Manufacturing Group, the Head of the Innovative Manufacturing Research Theme, Director of the Manchester Biomanufacturing Centre, member of the Senior Leadership Team Committee, School Board Promotion Committee and Equality and Diversity Committee, and Group Output Champion. Awards: Commendation and public recognition from the Portuguese Government, published in the Portuguese Government’s Law Journal (Diário da Republica), for the outstanding work as advisor of the Government in the area of Research and Innovation; Commendation from the Polytechnic Institute of Leiria, published in the Portuguese Government Journal (Diário da Republica), for the outstanding work carried out (2014); Council award Afonso Lopes Vieira in the area of Innovation, Leiria Town Council, Portugal (2009).
- Pereira, R., Sousa, A., Barrias, C., Bartolo, P., Granja, P. – “A dual-crosslinked, tunable and biofunctional hydrogel for bioprinting of cell-responsive 3D tissue constructs”, Materials Today, Submitted (IMPACT FACTOR: 21.695)
- Huang, B., Caetano, G., Blaker, J., Ambler, W., Diver, C., Bartolo, P.J. – “Polymer-ceramic composite scaffolds: the effect of hydroxyapatite and b-tri-calcium phosphate”, Materials, Submitted (IMPACT FACTOR: 2.654)
- Liu, F., Vyas, C., Poologasundarampillai, G., Pape, I., Hinduja, S., Mirihanage, W., Bartolo, P. – “Structural evolution pf PCL during melt extrusion 3D printing”, Macromolecular Materials and Engineering, Submitted (IMPACT FACTOR: 2.863)
- Caetano, G., Wang, W., Chiang, W.H., Ambler, W., Wang, S.Y., Cooper, G., Diver, C., Blaker, J., Frade, M.A., Bartolo, P.J. – “PCL/graphene scaffolds activated with P1-latex protein for bone regeneration”, Biomedical Materials, Submitted (IMPACT FACTOR: 2.469)
- Almeida, H.A., Bartolo, P.J. – “Design of tissue engineering scaffolds based on hyperbolic surfaces: vascular numerical evaluation”, Medical Engineering & Physics, Submitted (IMPACT FACTOR: 1.819)
- Pereira, R., Sousa, A. Sousa, Barrias, C., Bartolo, P.J., Granja, P. – “A dual-crosslinked, tunable and biofunctional hydrogel for bioprinting of cell-responsive 3D tissue constructs”, Advanced Materials, Submitted (IMPACT FACTOR: 19.791)
- Liu, F., Hinduja, S., Bartolo, P.J. – “User interface tool to design and fabricate functionally graded scaffolds through a novel plasma-assisted bio-extrusion system”, Rapid Prototyping Journal, In Press (IMPACT FACTOR: 2.400)
- Craveiro, F., Bartolo, H., Duarte, J.P., Gale, A., Bartolo, P.J – “A design tool for resource-efficient fabrication of 3D-graded structural building components using additive manufacturing”, Automation in Construction, 82, 75, 2017 (IMPACT FACTOR: 2.919)
- Gheisari, R., Goddard, N., Bartolo, P.J. – “An experimental study to investigate the micro-stereolithography tools for microinjection moulding”, Rapid Prototyping Journal, 23, 711, 2017, (IMPACT FACTOR: 2.400)
- Costa, E.C., Duarte, J., Bartolo, P.J. – “A review of additive manufacturing for ceramic production”, Rapid Prototyping Journal, 23, 954, 2017 (IMPACT FACTOR: 2.400)
- Dias, J., Baptista-Silva, S., Oliveira, C., Sousa, A., Oliveira, A., Bartolo, P.J., Granja, P. – “In situ crosslinked electrospun gelatin nanofibers for skin regeneration”, European Polymer Journal, 95, 161, 2017 (IMPACT FACTOR: 3.531)
- Dias, J.R., Santos, C., Horta, J., Granja, P.L., Bartolo, P.J. – “A new design of an electrospinning apparatus for tissue engineering”, International Journal of Bioprinting, 3, 1, 2017
- Pereira, R., Sousa, A., Barrias, C.C., Bayat, A., Granja, P.L., Bartolo, P.J. – “Advances in bioprinted cell-laden hydrogels for skin tissue engineering”, Biomanufacturing Reviews, 2, 1, 2017
- Al-Tamimi, A., Fernandes, P.R., Peach, C., Cooper, G., Diver, C., Bartolo, P.J. – “Metallic bone fixation implants: a novel design approach for reducing the stress shielding phenomenon”, Virtual and Physical Prototyping, 12, 141, 2017
- Khani, N., Nadernezhad, A., Bartolo, P.J., Koc, B. – “Hierarchical and spatial modelling and bio-manufacturing of multi-material constructs”, CIRP Annals – Manufacturing Technology, 66, 229, 2017 (IMPACT FACTOR: 2.893)
- Ruiz-Soler, A., Kabinejadian, F., Bartolo, P.J., Slevin, M.A., Keshmiri, A. – “Optimisation of a novel spiral-inducing bypass graft using computational fluid dynamics”, Scientific Reports, 7, 1865, 2017 (IMPACT FACTOR: 4.259)
- Vyas, C., Pereira, R., Huang, B., Liu, F., Wang, W., Bartolo, P.J. – “Engineering the vasculature with additive manufacturing”, Current Opinion in Biomedical Engineering, 2, 1, 2017
- Zheng, M., Zou, Z., Bartolo, P.J., Peach, C., Ren, L. – “Finite element models of the human shoulder complex: their clinical implications and modelling techniques”, International Journal for Numerical Methods in Biomedical Engineering, 2017, e02777, 2017 (IMPACT FACTOR: 2.192)
- Dias, J.R., Granja, P.L., Bartolo, P.J. – “Advances in electrospun skin substitutes”, Progress in Materials Science, 84, 314, 2016 (IMPACT FACTOR: 31.140)
- Wang, W., Caetano, G., Ambler, W., Blaker, J.J., Frade, M., Diver, C., Bartolo, P.J. – “Enhancing the hydrophilicity and cell attachment of 3D printed PCL/graphene scaffolds for bone tissue engineering”, Materials, 9, 992, 2016 (IMPACT FACTOR: 2.658)
- Viana, J.H., Hinduja, S., P.J. Bartolo, P.J. – “Estimation of biometric parameters from cattle rump using free-hand scanning and a 3D data processing algorithm”, Virtual and Physical Prototyping, 11, 167, 2016
- Domingos, M., Gloria, A., Coelho, J., Bartolo, P., Ciurana, J. – “Three-dimensional printed bone scaffolds: the role of nano/micro-hydroxyapatite particles on the adhesion and differentiation of human mesenchymal stem cells”, Proceedings IMech E Part H: Journal of Engineering in Medicine, 1, 2016 (IMPACT FACTOR: 1.005)
- Wang, W., Chiang, W.H., Caetano, G.F., Braz, A.L., Blaker, J., Frade, M.A.C., Bartolo, P.J. - “Morphological, mechanical and biological assessment of PCL/Pristine graphene scaffolds for bone regeneration”, International Journal of Bioprinting, 2, 95, 2016
- Caetano, G., Violante, R., Sant’Ana, A.B., Murashima, A.B., Domingos, M., Gibson, A., Bartolo, P., Frade, M.A. – “Cellularized versus decellularized scaffolds for bone regeneration”, Materials Letter, 182, 338, 2016 (IMPACT FACTOR: 2.572)
- Freitas, D., Almeida, H.A., Bartolo, H., Bartolo, P.J. – “Sustainability in extrusion-based additive manufacturing technologies”, Progress in Additive Manufacturing, 1, 65, 2016
- Moura, C.S., Ferreira, F.C. Ferreira, Bartolo, P.J. – “Comparison of three-dimensional extruded poly(e-caprolactone) and polylactic acid scaffolds with pore size variation”, Procedia CIRP, 49, 209, 2016
- Ronca, D., Langella, F., Chierchia, M., D´Amora, U., Russo, T., Domingos, M., Gloria, A., Bartolo, P.J., Ambrosio, L. – “Bone tissue engineering: 3D PCL-based nanocomposite scaffolds with tailored properties”, Procedia CIRP, 49, 51, 2016
- Pereira, R., Bartolo, P.J. – “A review on traditional therapies for skin wound healing”, Advances in Wound Care, 5, 208, 2016
- Dias, N., Fonte, C., Sousa, C., Bartolo, P.J., Dias, M., Lopes, J., Santos, R. – “Real time control of mixing in reaction injection moulding”, Chemical Engineering Research and Design, 105, 31, 2016 (IMPACT FACTOR: 2.538)
- Pereira, R., Bartolo, P.J. – “3D bioprinting of photocrosslinkable hydrogel constructs”, Journal of Applied Polymer Science, 132, 42458, 2015 (IMPACT FACTOR: 1.860)
- Fielder, T., Videira, A.C., Bartolo, P.J., Strauch, G.E., Ferreira, J.M.F. – “On the mechanical properties of PCL-bioactive glass scaffolds fabricated via BioExtrusion”, Materials Science and Engineering C, 57, 288, 2015 (IMPACT FACTOR: 4.164)
- Huis in’t Velt, B., Overmeyer, L., Schmidt, M., Wegener, K., Malshe, A., Bartolo, P.J. – “Micro additive manufacturing using ultrashort laser pulses”, CIRP Annals – Manufacturing Technology, 64, 701, 2015 (IMPACT FACTOR: 2.893)
- Pereira, R., Bartolo, P.J. – “3D photo-fabrication for tissue engineering and drug delivery”, Engineering, 1, 91, 2015
- Biscaia, S., Viana, T., Almeida, H., Bartolo, P.J. – “Production and characterization of PCL/ES scaffolds for bone tissue engineering”, Materials Today: Proceedings, 2, 208, 2015
- Caetano, G.F., Bartolo, P.J., Domingos, M., Oliveira, C.C., Leite, M.N., Frade, M.A. – “Osteogenic differentiation of adipose-derived mesenchymal stem cells into polycaprolactone (PCL) scaffold”, Proceedia Engineering, 110, 59, 2015
- Caseiro, A.R., Pereira, T., Bartolo, P.J., Santos, J.D., Luís, A.L., Maurício, A.C. – “Mesenchymal stem cells and biomaterials systems – perspectives for skeletal muscule tissue repair and regeneration”, Proceedia Engineering, 110, 90, 2015
- Caseiro, A.R., Pereira, T., Ribeiro, J., Amorim, I., Faria, F., Bartolo, P.J., Armada, P., Luís, A.L., Maurício, A.C. – “Neuro-muscular regeneration using scaffolds with mesenchymal stem cells (MSCs) isolated from human umbilical cord Wharton’s jelly: functional and morphological analysis using rat sciatic nerve neurotmesis injury model”, Proceedia Engineering, 110, 106, 2015
- Moura, C.S., Silva, C.L., Bartolo, P.J., Ferreira, F.C. – “Combination of 3D extruded-based poly(ε-caprolactone) scaffolds with mesenchymal stem/stromal cells: strategy optimization”, Proceedia Engineering, 110, 122, 2015
- Almeida, H., Bartolo, P.J. – “Tensile and shear stress evaluation of schwartz surfaces for scaffold design”, Proceedia Engineering, 110, 167, 2015
- Almeida, H., Bartolo, P.J. – “Combined elastic and shear stress solicitations for topological optimization of micro-CT based scaffolds”, Proceedia Engineering, 110, 159, 2015
- Gheisari, R., Bartolo, P.J., Goddard, N. – “Visualization of flow behaviour in micro-cavities during micro injection moulding”, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9, 1026, 2015
- Pereira, T., Ivanova, G., Caseiro, A.R., Barbosa, P.P., Bartolo, P.J., Santos, J.D., Luis, A.L., Mauricio, A.C. – “MSCs conditioned media and umbilical cord blood plasma metabolomics and composition”, PLOS ONE, 9(11): e113769, 2014 (IMPACT FACTOR: 2.806)
- Pereira, T., Armanda-da-Silva, P.A.S., Amorim, I., Rema, A., Caseiro, A.R., Gartner, A., Rodrigues, M., Lopes, M., Bartolo, P.J., Santos, J.D., Luís, A.L., Mauricio, A.C. – “Effects of human mesenchymal stem cells (HMSCs) isolated from the Whorton’s jelly of the umbilical cord and condinioned media (CM) on skeletal muscle regeneration using myectomy model”, Stem Cells International, Volume 2014, Article ID 376918, 2014 (IMPACT FACTOR: 3.540)
- Gonçalves, F., Costa, C.S., Fabela, I., Farinha, D., Faneca, H., Simões, P., Serra, A., Bartolo, P.J., Coelho, J. – “3D printing of new biobased unsaturated polyesters by microstereo-thermal-lithography”, Biofabrication, 6, 035024, 2014 (IMPACT FACTOR: 5.240)
- Sousa, I., Mendes, A., Pereira, R.F., Bartolo, P.J. – “Collagen surface modified poly(?-caprolactone) scaffolds with improved hydrophilicity and cell adhesion properties”, Materials Letters, 134, 263, 2014 (IMPACT FACTOR: 2.572)
- Pereira, R., Freitas, M.F., Tojeira, A.P., Alves, N., Almeida, H.A., Bártolo, P.J. – “Computer modelling and simulation of a bioreactor for tissue engineering”, International Journal of Computer Integrated Manufacturing, 27, 946, 2014 (IMPACT FACTOR: 1.319)
- Pereira, T., Gartner, A., Amorim, I., Almeida, A., Caseiro, A.R., Armanda-da-Silva, P.A., Amado, S., Fregnan, F., Varejão, A.S., Santos, J.D., Bartolo, P.J., Geuna, S., Luís, A.L., Mauricio, A.C. – “Promoting nerve regeneration in a neurotmesis rat model using poly(DL-lactide-e-caprolactone) membranes and mesenchimal stem cells from the Wharton’s jelly: in vitro and in vivo analysis”, BioMed Research International, 2014, Article ID 302659, 2014 (IMPACT FACTOR: 2.476)
- Pereira, T., Gartner, A., Amorim, I., Almeida, A., Caseiro, A.R., Armada-da-Silva, P.A.S., Amando, S., Fregnan, F., Varejão, A.S.P., Santos, J.D., Bartolo, P.J., Geuna, S., Luís, A.L., Mauricio, A.C. – “Cell therapy with human MSCs isolated from the umbilical cord wharton jelly associated to PVA membrane in the treatment of chronic skin wounds”, International Journal of Medical Sciences, 11, 979, 2014 (IMPACT FACTOR: 2.399)
- Pereira, A.M., Ferreira, J.A.M., Antunes, F.V., Bártolo, P.J., “Assessment of the fatigue life on aluminium spot welded and weld-bonded joints”, The Journal of Adhesion Science and Technology, 28, 1432, 2014 (IMPACT FACTOR: 1.073)
- Almeida, H.A., Bártolo, P.J. – “Design of tissue engineering scaffolds based on hyperbolic surfaces: mechanical evaluation”, Medical Engineering & Physics, 36, 1033, 2014 (IMPACT FACTOR: 1.819)
- Patricio, T., Domingos, M., Gloria, A., Coelho, J., Bártolo, P.J. – “Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering”, Rapid Prototyping Journal, 20, 145, 2014 (IMPACT FACTOR: 2.400)
- Freitas, D., Almeida, H.A., Bartolo, P.J. – “Perfusion bioreactor fluid flow optimization”, Procedia Technology, 16, 1238, 2014
- Dinis, J.C., Morais, T.F., Amorim, P.H.J., Ruben, R.B., Almeida, H.A., Inforçati, P.N., Bartolo, P.J., Silva, J.V.L. – “Open source software for the automatic design of scaffold structures for tissue engineering applications”, Procedia Technology, 16, 1542, 2014
- Duarte, A., Carrão, L., Espanha, M., Viana, T., Freitas, D., Bartolo, P.J., Faria, P., Almeida, H.A. – “Segmentation algorithms for thermal images”, Procedia Technology, 16, 1560, 2014
- Morgado, T., Pereira, R.F., Vaz, D.C., Mendes, A., Bartolo, P.J. – “Photocrosslinkable hydrogels containing drug-loaded particles for biomedical applications”, Revista de Saúde Pública, 20, 2014 (IMPACT FACTOR: 0.733)
- Viana, T., Biscaia, S., Almeida, H., Bartolo, P.J. – “Extrusion processes to fabricate biodegradable 3D scaffolds for tissue engineering”, Revista de Saúde Pública, 48, 301, 2014 (IMPACT FACTOR: 0.733)
- Freitas, D., Almeida, H., Bartolo, P.J. – “Biomechanical analysis of the cartilage”, Revista de Saúde Pública, 48, 302, 2014 (IMPACT FACTOR: 0.733)
- Freitas, D., Almeida, H., Bartolo, P.J. – “Integrative rehabilitation device - exoskeleton”, Revista de Saúde Pública, 48, 304, 2014 (IMPACT FACTOR: 0.733)
- Perestrelo, P., Bartolo, P.J., Torres, M., Noritomi, P., Silva, J. – “Human cranial simulation”, Journal of Medical Imaging and Health Informatics, 4, 101, 2014 (IMPACT FACTOR: 0.621)
- Domingos, M., Intranuovo, F., Russo, T., De Santis, R., Gloria, A., Ambrosio, L., Ciurana, J., Bartolo, P.J. – “A systematic analysis of 3D rapid prototyped poly(e-caprolactone) scaffolds manufactured through BioCell Printing: effect of pore size and geometry on compressive mechanical behaviour and in vitro hMSC viability”, Biofabrication, 5, 045004, 2013 (IMPACT FACTOR: 5.240)
- Santos, R.C., Almeida, H.A., Bartolo, P.J. – “Additive manufacturing techniques for scaffold-based cartilage tissue engineering”, Virtual and Physical Prototyping, 8, 175, 2013
- Pereira, R.F., Carvalho, A., Gil, M.H., Mendes, A., Bartolo, P.J. – “Influence of Aloe vera on water absorption and the enzymatic in vitro degradation of alginate”, Carbohydrate Polymers, 98, 311, 2013 (IMPACT FACTOR: 4.811)
- Almeida, H., Bartolo, P.J.- “Numerical simulations of bioextruded polymer scaffolds for tissue engineering”, Polymer International, 62, 1544, 2013 (IMPACT FACTOR: 2.070)
- Mota, C., Puppi, D., Gazzarri, M., Bartolo, P., Chiellini, F. – “Melt electrospinning writing of 3D star poly(e-caprolactone) scaffolds”, Polymer International, 62, 893, 2013 (IMPACT FACTOR: 2.070)
- Mitsuishi, M., Cao, J., Bartolo, P.J., Friedrich, D., Shih, A., Rajurkar, K., Sugita, N., Harada, K. – “Biomanufacturing”, CIRP Annals – Manufacturing Technology, 62, 585, 2013 (IMPACT FACTOR: 2.893)
- Pereira, R.F., Barrias, C.C., Granja, P.L., Bartolo, P.J. – “Advanced strategies for skin regeneration and repair”, Nanomedicine, 8(4), 501, 2013 (IMPACT FACTOR: 4.727)
- Domingos, M., Intranuovo, F., Gloria, A., Gristina, R., Ambrosio, L., Bartolo, P.J., Favia, P. – “Improved osteoblast cell affinity on plasma-modified 3D extruded PCL scaffolds”, Acta Biomaterialia, 9(4), 5997, 2013 (IMPACT FACTOR: 6.319)
- Pereira, R., Carvalho, A., Vaz, D.C., Gil, M.H., Mendes, A., Bartolo, P.J. – “Development of novel alginate based hydrogel films for wound healing applications”, International Journal of Biological Macromolecules, 52, 221, 2013 (IMPACT FACTOR: 3.671)
- Carreira, P., Alves, N., Ramos, C., Bartolo, P.J. – “Optimization of thermoplastic pre-pregs overmoulding”, Applied Mechanics and Materials, 365/366, 1007, 2013
- Patricio, T., Bartolo, P.J. – “Thermal stability of PCL/PLA blends produced by physical blending processe”, Procedia Engineering, 59, 292, 2013
- Viana, T., Biscaia, S., Almeida, H.A., Bartolo, P.J. – “Permeability evaluation of lay-down patterns and pore size of PCL scaffolds”, Procedia Engineering, 59, 255, 2013
- Gonzalez, G., Dias, J., d´´Avila, M.A., Bartolo, P.J. – “Influence of hydroxyapatite on extruded 3D scaffolds”, Procedia Engineering, 59, 263, 2013
- Pereira, R.F., Bartolo, P.J. – “Degradation behavior of biopolymer-based membranes for skin tissue regeneration”, Procedia Engineering, 59, 285, 2013
- Sousa, I., Mendes, A., Bartolo, P.J. – “PCL scaffolds with collagen bioactivator for applicatios in tissue engineering”, Procedia Engineering, 59, 279, 2013
- Almeida, H.A., Bartolo, P.J. – “Topological optimisation of scaffolds for tissue engineering”, Procedia Engineering, 59, 298, 2013
- Gomez, E, Dias, J.R., D’Amora, U., Rodríguez, C.A., Glória, A., Bártolo, P.J. – “Morphologial and mechanical evaluation of hybrid scaffolds for bone regeneration”, Advanced Materials Research, 749, 429, 2013
- Patrício, T., Pereira, R., Oliveira, L., Bartolo, P.J. – “Polyethylene glycol and polyethylene glycol/hydroxyapatite constructs produced through stereo-thermal-lithography”, Advanced Materials Research, 749, 87, 2013
- Franco, M.R., Viana, T.F., Biscaia, S., Bartolo, P.J. – “Levodopa incorporation in alginate membranes for drug delivery studies”, Advanced Materials Research, 749, 423, 2013
- Almeida, H.A., Bartolo, P.J. – “Numerical simulation of polymeric extruded scaffolds under compression”, Procedia CIRP, 5, 236, 2013
- Pereira, R., Mendes, A., Bartolo, P.J. – “Alginate/aloe vera hydrogel films for biomedical applications”, Procedia CIRP, 5, 210, 2013
- Patrício, T., Domingos, M., Gloria, A., Bártolo, P.J. – “Characterization of PCL and PCL/PLA scaffolds for tissue engineering”, Procedia CIRP, 5, 110, 2013
- Dias, J., Bartolo, P.J. – “Morphological characteristics of electrospun PCL meshes – the influence of solvent type and concentration”, Procedia CIRP, 5, 216, 2013
- Perestrelo, P., Bartolo, P.J., Paranhos, M., Noritomi, P., Silva, J. – “Cranial biomechanical simulation”, Procedia CIRP, 5, 305, 2013
- Craveiro, F., Bártolo, H., Bártolo, P.J. – “Functionally graded structures through building manufacturing”, Advanced Materials Research, 683, 775, 2013
- Dias, J., Glória, A., Bártolo, P.J. – “Mechanical and biological characteristics of electrospun PCL meshes – the influence of solvent type and concentration”, Advanced Materials Research, 683, 137, 2013
- Patrício, T., Gloria, A., Bártolo, P.J. – “PCL and PCL/PLA scaffolds for bone tissue regeneration”, Advanced Materials Research, 683, 168, 2013
- Pereira, R., Mendes, A., Bártolo, P. – “Evaluating the properties of na alginate wound dressing for skin repair”, Advanced Materials Research, 683, 141, 2013
- Ramos C., Carreira, P., Alves, N., Bártolo, P.J. – “OPTIMALMOULD: Cooling system influence in the injection moulding cycle time optimization”, Advanced Materials Research, 683, 544, 2013
- Carreira, P., Alves, N., Ramos, C., Bartolo, P.J. – “Bio inspired algorithms for injection moulding optimization”, Advanced Materials Research, 683, 544, 2013
- Dias, J.R., Antunes, F.E., Bartolo, P.J. – “Influence of the rheological behavior in electrospinning PCL nanofibres production for tissue engineering applications”, Chemical Engineering Transactions, 32, 1015, 2013
- Pereira, R., Mendes, A., Bartolo, P.J. – “Novel alginate/aloe vera hydrogel blends as wound dressings for the treatment of several types of wounds”, Chemical Engineering Transactions, 32, 1009, 2013
- Patricio, T., Gloria, A., Bartolo, P.J. – “Mechanical and biological behavior of PCL/PLA scaffolds for tissue engineering”, Chemical Engineering Transactions, 32, 1645, 2013
- Almeida, H., Bartolo, P.J., “Structural shear stress evaluation of hyperbolic scaffolds for tissue engineering applications”, Journal of Tissue Engineering and Regenerative Medicine, 6(S1), 233, 2012 (IMPACT FACTOR: 3.989)
- Bartolo, P.J., Kruth, J.P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Leu, M. – “Biomedical production of implants by additive electro-chemical and physical processes”, CIRP Annals – Manufacturing Technology, 61, 635, 2012 (IMPACT FACTOR: 2.893)
- Almeida, S.R., Almeida, H.A., Bártolo, P.J., “Vascular simulation of polymer degrading scaffolds for tissue engineering”, Journal of Biomechanics, 45(S1), S664, 2012 (IMPACT FACTOR: 2.664)
- Almeida, S.R., Bártolo, P.J., “Cell mechanobiology design of scaffolds based on hyperbolic surfaces”, Journal of Biomechanics, 45(S1), S663, 2012 (IMPACT FACTOR: 2.664)
- Melchels, F.P.W., Domingos, M.A.N., Klein, T.J., Malda, J., Bártolo, P.J., Hutmacher, D.W., “Additive Manufacturing of Tissues and Organs”, Progress in Polymer Science, 37, 1079, 2012 (IMPACT FACTOR: 25.766)
- Domingos, M., Chiellini, F., Gloria, A., Ambrosio, L., Bartolo, P.J., Chiellini, E., Effect of process parameters of the properties of 3D bioextruder poly(e-caprolactone) scaffolds, Rapid Prototyping Journal, 18, 56, 2012 (IMPACT FACTOR: 2.400)
- Pereira, R., Tojeira, A., Vaz, D., Mendes, A. Bártolo, P.J., “Films based on sodium alginate and aloé vera: preparation and characterization”, International Journal of Polymer Analysis and Characterization, 16, 449, 2011 (IMPACT FACTOR: 1.515)
- Mitchell, G.R., Domingos, M., Bártolo, P.J. – “Polymers, biomanufacturing and regenerative medicine”, Advanced Materials Research, 506, 11, 2012
- Domingos, M., Chiellini, F., Cometa, S., De Giglio, E., Grilo-Fernandes, E., Bártolo, P.J., Chiellini, E., “Evaluation of in vitro degradation of PCL scaffolds fabricated via bioextrusion – Part 2: Influence of pore size and geometry”, Virtual and Physical Prototyping, 6, 157, 2011
- Bártolo, P.J., Domingos, M., Gloria, A., Ciurana, J., “BioCell Printing: Integrated automated assembly system for tissue engineering constructs”, CIRP Annals -Manufacturing Technology, 60, 271, 2011 (IMPACT FACTOR: 2.893)
- Mota, C., Puppi, D., Dinucci, D., Errico, C., Bártolo, P.J., Chiellini, F. – “Dual-scale polymeric constructs as scaffolds for tissue engineering”, Materials, 4, 527, 2011 (IMPACT FACTOR: 2.658)
- Loaiza, M.C., Sabino, M., Bártolo, P.J., Domingos, M., Müller, A.J. – “Obtención de andamios biodegradables mediante bioextrusión”, Rev. LatinAm. Metal. Mat., S3, 22, 2011
- Almeida, H. and Bártolo, P.J.-"Topological optimisation of scaffolds for rapid prototyping", Medical Engineering & Physics, 32, 775, 2010 (IMPACT FACTOR: 1.819)
- Domingos, M., Chiellini, F., Cometa, S., Giglio, E., Grilo-Fernandes, E., Bártolo, P.J., Chiellini, E. - "Evaluation of in vitro degradation of PCL scaffolds via bioextrusion - Part 1: Influence of the degradation environment", Virtual and Physical Prototyping, 5, 1, 2010
- Pontes, A.J., Queirós, M.P., Martinho, P., Bártolo, P.J., Pousada, A.S. - "Experimental assessment of hybrid mould performance", International Journal on Advanced Manufacturing Technologies, 50, 441, 2010 (IMPACT FACTOR: 2.209)
- Pereira, M., Ferreira, J.M., Antunes, F.V. and Bártolo, P.J.-"Analysis of manufacture parameters on the shear strength of aluminium single lap joints", Journal of Materials Processing Technology, 210, 610, 2010 (IMPACT FACTOR: 3.147)
- Pereira, A.M., Ferreira, J.M., Loureiro, A., Costa, J.D.M. and Bártolo, P.J.-"Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy", Materials & Design, 31, 2454, 2010 (IMPACT FACTOR: 4.364)
- Bártolo, P.J., Chua, C.K., Almeida, H.A., Chou, S.M. and Lim, A.S.C-"Biomanufacturing for tissue engineering: present and future trends", Virtual and Physical Prototyping, 4, 203, 2009
- Domingos, M., Dinucci, D., Cometa, S., Alderighi, M., Bártolo, P.J. and Chiellini, F.-"Polycaprolactone scaffolds fabricated via bioextrusion for tissue engineering", International Journal of Biomaterials, 2009, 1, 2009
- Rezende, R., Rezende, M., Bártolo, P.J., Mendes, A., Maciel Filho, R.- "Optimization of scaffolds in alginate for biofabrication by genetic algorithms", Computer Aided Chemical Engineering, 27, 1935, 2009
- Rezende, R.A., Rezende, M.C.A.F., Maciel Filho, R., Bártolo, P.J.-"Genetic algorithms for optimising alginate-scaffolds for tissue engineering", Chemical Engineering Transactions, 17, 1305, 2009
- Domingos, M., Chiellini, F., Cometa, S., Dinucci, D., Bartolozzi, I., Bártolo, P.J. and Chiellini, E.-"Solid freeform fabrication and in vitro characterization of 3D polycaprolactone based scaffolds for tissue engineering", Tissue Engineering and Regenerative Medicine, 6, S86, 2009 (IMPACT FACTOR: 1.169)
- Almeida, H.A. and Bártolo, P.J.-"Structural evaluation of multi-material scaffolds for tissue engineering", Tissue Engineering and Regenerative Medicine, 6, S117, 2009 (IMPACT FACTOR: 1.169)
- Matias, J.M., Bártolo, P.J. and Pontes, A.V.-"Modelling and simulation of photo-fabrication processes using unsaturated polyester resins", Journal of Applied Polymer Science, 114, 3673, 2009 (IMPACT FACTOR: 1.860)
- Pereira, A.M., Ferreira, J.M., Antunes, F.V., Bártolo, P.J. - "Study on the fatigue strength of AA 6082", International Journal of Adhesion & Adhesives, 29, 633, 2009 (IMPACT FACTOR: 2.211)
- Martinho, P., Bártolo, P.J. and Pouzada, P.-"Hybrid moulds: effect of the moulding blocks on the morphology and dimensional properties", Rapid Prototyping Journal, 15, 71, 2009 (IMPACT FACTOR: 2.400)
- Bártolo, P.J., Almeida, H. and Laoui, T.- "Rapid prototyping and manufacturing for tissue engineering", International Journal of Materials and Product Technology, 36, 1, 2009 (IMPACT FACTOR: 0.488)
- Rezende, R., Bártolo, P.J., Mendes, A., Maciel Filho, R. – “Rhelogical behaviour of alginate solutions for biomanufacturing”, Journal of Applied Polymer Science, 113, 3866, 2009 (IMPACT FACTOR: 1.860)
- Domingos, M., Chiellini, F., Bártolo, P.J., and Chiellini, E.-"Polycaprolactone scaffolds for tissue engineering applications fabricated via bioextrusion", Biomedicine & Pharmacotherapy, 62, 490, 2008 (IMPACT FACTOR: 2.759)
- Gaspar, J., Bártolo, P.J. and Duarte, F.M.-"Cure and rheological analysis of reinforced resins for stereolithography", Materials Science Forum, 587/588, 563, 2008
- Bártolo, P.J. and Gaspar, J.-"Metal filled resin for stereolithography metal part", CIRP Annals – Manufacturing Technology, 57, 235, 2008 (IMPACT FACTOR: 2.893)
- Hoque, M.E., Feng, W., Wong, Y.S., Hutmacher, D.W., Li, S., Huang, M.H., Vert, M. and Bártolo, P.J.-"Scaffolds designed and fabricated with elastic biomaterials applying CAD-CAM technique", Tissue Engineering Part A, 14(5), 907, 2008 (IMPACT FACTOR: 3.485)
- Alves, N.F. and Bártolo, P.J.-"Automatic shape recover for rapid prototyping", Virtual and Physical Prototyping, 3, 123, 2008
- Vasco, J., Bártolo, P.J., Silva, B. and Galo, C. -"Laser micromachining for mould manufacturing: II. Manufacture and testing of mould inserts", Assembly Automation, 27, 231, 2007 (IMPACT FACTOR: 1.367)
- Ferreira, J.C., Bártolo, P.J., Alves, N.F. and Marques, J. - "Virtual and rapid prototyping for die-casting development" International Journal of Computer Applications in Technology, 30, 176, 2007
- Alves, N.F. and Bártolo, P.J.- "Virtual modelling from human vision sense" International Journal on Interactive Design and Manufacturing, 1, 195, 2007
- Bártolo, P.J.- "Photo-curing modelling: direct irradiation" International Journal of Advanced Manufacturing Technologies, 32, 480, 2007 (IMPACT FACTOR: 2.219)
- Rezende, R.A., Bártolo, P.J., Mendes, A. and Maciel Filho, R. - "Experimental characterisation of the alginate gelification process for rapid prototyping", Chemical Engineering Transactions, 11, 509, 2007
- Rezende, M.C., Costa, A.C., Maciel Filho, R., Bártolo, P.J. and Rezende, R.A. - "A systematic procedure to set up the genetic algorithm parameters for large scale systems: application to a three-phase catalytic reactor", Chemical Engineering Transactions, 11, 827, 2007
- Vasco, J., Bártolo, P.J., Silva, B. and Galo, C.- "Laser micromachining for mould manufacturing: I. the influence of operating conditions" Assembly Automation, 26(3), 227, 2006 (IMPACT FACTOR: 1.367)
- Bartolo, P.J. - "Computer simulation of stereolithographic curing reactions: phenomenological versus mechanistic approaches", CIRP Annals – Manufacturing Technology, 55(1), 221, 2006 (IMPACT FACTOR: 2.893)
- Alves, N.F. and Bártolo, P.J. - "Integrated computational tools for virtual and physical automatic construction", Automation in Construction, 15, 257, 2006 (IMPACT FACTOR: 2.919)
- Ferreira, J.C., Alves, N.F., Bártolo, P.J. - "Rapid manufacturing of medical prostheses" International Journal of Manufacturing Technology and Management, 6(6), 567, 2004
- Alves, N.F., Bártolo, P.J. and Ferreira, J.C. - "Computer rapid design: I. Accuracy analysis" International Journal of Product Development, 1(2), 183, 2004
- Alves, N.F., Bártolo, P.J. and Ferreira, J.C. - "Computer rapid design: II. Application" International Journal of Product Development, 1(2), 203, 2004
- Bártolo, P.J. and Mitchell, G. - "Stereo-thermal-lithography: a new principle for rapid prototyping" Rapid Prototyping Journal, 9, 150, 2003 (IMPACT FACTOR: 2.400)
- Bártolo, P.J. and Alves, N.M. - "Rapid generation of computer models from large objects", Time-Compression Technologies, 7(4), 2002 (Invited paper)
- Bártolo, P.J. and Mitchell, G. - "New simulation tool optimizes SL systems", Time-Compression Technologies, 7(3), 2002 (Invited paper) Bártolo, P.J. and Mitchell, G. - "Computer aided modelling and optimisation of thermosetting cure reactions", Europhys. Conf. Abst., 241, 147, 2000
Serial no:IIEBM0205
Guidelines
Subscribe
This work is licensed under a
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright @ Innovation Info, All Rights Reserved.